Can't add a box there? How about the other side of the wall? Maybe you will even get lucky and end up in a closet! Only if you're in a closet, you must make it a J-box w/blank cover, outlets, switches are not allowed in closets.As long as you can get to the box, a proper splice will be code compliant. If the wire is a feed, perhaps include an outlet in the box. Add a "deep Handy box" (single outlet box) at outlet height and splice the wire coming from the floor to a new wire going up if you can replace that wire.Okay, so obviously you want to sleep at night so here are a few code compliant ideas. Is that code compliant? Will an inspector fail the job if he saw it? Absolutely! The inspector does not know what is behind the tape and is not going to take your word for it. Then I have layed the insulation back and given it a few wraps with the Scotch 33 (600V insulation per wrap!, not the cheap stuff) and felt confident it was safe. And I was also sure that it was used as a neutral (and not a switched lead). If it is a neutral with just the insulation rubbed away (not a compromise to the conductor!). I have taped a few staple mishaps along the way. I like this idea, but if it's not NEC compliant then I think SteveR will get the answer. shirlock homes recommends wrapping the damaged neutral wire with insulating tape then taping up the jacket. SteveR brought an excellent option to my attention, and that is to expose the junction box on the other side of the wall since, in my case, it happens to be a closet. Update: Right now, it's between shirlock homes and SteveR for the answer. I am hoping someone isn't going to tell me that NEC requires me to repair the damaged section by replacing it with a new wire and installing a junction box or something. Is it okay to repair this tear with electrical tape? The copper wire itself was not damaged. The hole is but a mere dot measuring at about 1/32" in diameter. The damage is located halfway between the electrical box and the 5/8" hole in the frame's bottom plate where the wire disappears to beneath the floor somewhere. While trying to pry loose a stubborn cable staple that fastens a 14-gauge electrical cable to a stud, I accidentally tore a very small hole through both the outer jacket and the insulation around the neutral wire, exposing the bare conductor inside.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |